3.2.4.1.2.6 De-Energizing Delay time
This screen allows the user to set De-Energizing Delay time for Relay 1 Limit Assigned Parameters .
LINE-NEUTRAL VOLTAGE
LINE-NEUTRAL VOLTAGE
LINE-NEUTRAL VOLTAGE
RELAY-1 DE-ENERGIZING DELAY
ENTER DE-ENERGIZING DELAY IN SEC
Here a 0 to 9 digit input keypad is provided to set value of Delay, &
user can confirm this value with a simple touch on “ key.”
This screen can be accessed only from Limit Output settings
list menu.
“ key” is used to go back to Limit Output list menu.
ENTER
BACK
The allowable range is from 1 to 10 sec.
If value outside this range is entered, It will display “INVALID VALUE”
followed by correct range of parameter.
LINE-NEUTRAL VOLTAGE
LINE-NEUTRAL VOLTAGE
LINE-NEUTRAL VOLTAGE
VALID RANGE IS : 1 - 10 Secs
RELAY-1 DE-ENERGIZING DELAY
3.2.4.2 Relay 2 Output Selection
Configuration of Relay 2 for Pulse or Limit Output is same as Relay 1. If you Select the
Pulse output option for Relay 1 same setting will be applicable for Relay 2 except
assignment of energy to Pulse output (i.e. Energy assignment of both relay can be different.)
3.2.4.3 Parameter setting for Analog Output 1 ( Optional )
This option allows the user to set analog output 1 to corresponding measured parameter.
simple touch on “ANALOG-1”row will open screen having list of parameters.( Refer table2
“ Parameter for Analog & Limit output ”)
A
28
Touch on “ key” will confirm the setting.
Touching the “ key” will keep the old selected setting and will return to previous menu.
OK
BACK
1
2
3
4
5
6
7
8
9
0
BACK
DEL
ENTER
1
2
3
4
5
6
7
8
9
0
BACK
DEL
ENTER
Summary of Contents for mfm 3480
Page 2: ......
