6
Step 2:
Insert the Handpiece Gun Holder into the slot on the top of the Gun
Holder Base. Note that the Gun Holder Base is able to be detached from the main
unit by sliding it towards the back. This allows you to use the Gun Holder either in
an attached arrangement or in a remote position if that is more convenient.
Step 3:
Remove the strap on the Gun Cords and straighten them out. Place the
Gun into the Holder and attach the control cord with the notch towards the top
into the jack and then slide the black vacuum hose over the barb on the vacuum
outlet of the filter housing.
Step 4:
Attach the power cord to the receptacle in the back of the ZD-985 unit
and plug the other end into a mains AC outlet.
