12
Figure 5
Please note that there is a thin black vacuum seal washer that sits ahead of the
black plastic cap of the Solder Capture Chamber. It is possible for this washer to
be pulled out along with the chamber. When the washer sticks to the Capture
Chamber it makes the removal of the chamber more difficult. A thin coating of
talcum powder on the washer can minimize this problem. Be careful not to lose
this washer. If it comes out with the chamber it is best to put it back in place in
the front housing immediately. The Glass Chamber is breakable if dropped so use
due caution. The Solder Capture Chamber itself and associated seals are shown in
Figure 6. Note the Breach Plunger Silicone Seal is not removed during the routine
cleaning procedure. These parts are available as The Glass-Spare Kit. See the Parts
and Accessories List on page 18.
