11
ERROR Message
The ERROR message on the display indicates that something is wrong with the
system. Most simply the handpiece gun may not be plugged into the front jack or
it may be loose. Make certain the plug is tight and turn the unit off and on again
once more to see if the problem has cleared. If the ERROR persists contact
Memotronics at (281) 257-8587 or email us at
Cleaning the Solder Capture Container
The first step in cleaning the Solder Capture Container is to remove it from the
gun. Check out Figure 4 for a picture of the release button on the back of the gun.
Figure 4
Apply some pressure with your thumb to the breach to relieve tension on the
release latch. Slide the black button #2 down and this will release the breach.
Next, take a hold of the Clear Glass Solder Capture Chamber and push it back
against the open breach far enough so that you can lift the front of the chamber
up and out of the front recess. See Figure 5:
