Zetor HORTUS HS CL, Operator'S Manual

Page: 63 / 142

Exterior Hydraulic Lever (Optional)
Important:
z
Do not hold the lever in the ''Pull'' or ''Push'' position once the remote cylinder has reached the
end of the stroke. As this will cause oil to flow through the relief valve. Forc ing oil through the
relief valve for extended periods will overheat the oil.
z
When Using the tractor hydraulic system to power front loader, do not operate the boom and
bucket cylinders simultaneously.
Remote Hydraulic Control Valve Coupler Connecting and Disconnecting
Connecting
1. Clean both couplers.
2. Remove dust plugs.
3. Insert the implement coupler to the tractor hydraulic coupler.
4. Pull the implement coupler slightly to make sure couplers are firmly connected.
Disconnecting
1. Lower the implement first to the ground to release hydraulic pressure in the hoses.
2. Clean the couplers.
3. Relieve pressure by moving hydraulic control levers with engine shut off. Pull the hose straight from
the hydraulic coupler to release it.
4. Clean oil and dust from the coupler, then replace the dust plugs.
Move the lever up or down and hold. This will raise or
lower the implement. (Rotavator or hydraulic plow)
Lever will return to neutral by itself.
1 - Position B
2 - Position C
HODP075
1 - Position B
2 - Position C
HODP076
DESCRIPTION OF TRACTOR CONTROLS
62