Zetor HORTUS HS CL Operator'S Manual Download Page 135

Page: 135 / 142

Towing the Tractor

The tractor can be towed only for short distances, such as, for example, from inside to outside a building.

HODP164

A broken down tractor should be towed for the minimum indispensable distance to remove it from potentially

dangerous conditions. Observe all legal provisions as envisaged in the highway code relative to national

legislation regarding towing manoeuvres.

Caution:

We recommend transporting the tractor on a low loader in the case of longer

transport distances. Comply with the maximum width and height regulations for road transport.

Check that the loader is suitable for the weight of the tractor to be transported.

Caution:

An operator must always be at the tractor's controls when the tractor is being towed.

Danger:

NEVER permit other persons to access the tractor operator position during towing.

TROUBLESHOOTING

134

Summary of Contents for HORTUS HS CL















































































































































Search results

Summary of Contents for HORTUS HS CL

Reviews:

Related manuals for HORTUS HS CL

Brands by name

Popular brands

Zetor HORTUS HS CL, Operator'S Manual

Search results

Summary of Contents for HORTUS HS CL

Reviews:

Related manuals for HORTUS HS CL

Brands by name

Popular brands