Zetor HORTUS HS CL, Operator'S Manual

Page: 57 / 142

Sub Gear Lever (Linear Shift Lever)
Operate the sub gear lever using clutch to select the appropriate speed for different applications.
It is located on the LHS of driver seat.
Important: Avoid damage!
Select the proper speed range and gear for the job.
z
The machine maybe operated in any gear with engine speeds at 945 - 2,200 rpm. Within these
limits, the engine can be placed under varying load operations.
z
Never overload enigne by lugging machine at low idle speeds.
z
Raise engine speed the match expected loads. If a slight increase engine rpm occurs
simultaneously with mobin hand throttle lever forward, the engine is not overloaded.
The sub shift lever (A) provides three speed ranges. The main shift lever (B) provides four gear positions.
The reverse lever (C) controls travel direction.
Use all three levers in different combinations to achieve twenty four forward and twenty four reverse speeds.
Machine motion must stop and the clutch pedal must be depressed before changing ranges. Gear may be
changed while machine is in motion if clutch pedal is completely depressed.
1. Choose a speed range to match work application:
A: Low speed / high power operations such as tilling hard soil, mowing high grass or positioning
backhoe.
b: Operations including moderate tilling, hauling, and grass mowing.
2. Choose a gear that matches the immediate power / speed requirements
z
1st Gear: High power, low speed operations.
z
2nd Gear: Medium power, moderate speed operations.
z
3rd Gear: Low power, moderate speed operations.
Important: Do not operate gear levers without stopping the tractor & without using the clutch.
1 - Seat belt
2 - Main shift Lever
3 - Cushion control knob
4 - Seat adjusting Lever
5 - Sub shift Lever
HODP064
DESCRIPTION OF TRACTOR CONTROLS
56