Zetor HORTUS HS CL, Operator'S Manual

Page: 40 / 142

1 - Creep speed Operation! warning:
z
Don't use creep speed as shown below works.
1) Tow Loads
2) Front loader
3) Blade work
4) Civil Engineering work
5) In & out the jobsite
6) Heavy industry
z
Brake engagement at creep speed.
1) Be sure to depress clutch pedal before depress brake pedal.
2) Don't depress brake strongly as shaft reduction ratio of creep speed is very high and high
torque.
- Front wheel drive shift lever
- Creep speed shift lever
2 - Danger: Do not ride except operator. 1200-910-016-0
3 - Warning: Fast - Slow (Lock)
Always set the knob to lock when
1. Travelling on the road.
2. Replacing blades on an implement.
3. Making adjustment to an implement. Sudden dropping of an implement can cause serious
injury or death.
4 - Caution: Remote valve 'B' is 'Floating Detent' Type
z
Always select 'Neutral' before starting the engine.
z
Always select 'Neutral' after completing the hydraulic operation.
- Remote hydraulic valve instruments:
z
Remote valve couplers are numbered A and B from the bottom upward, and are operated by the
corresponding remote control lever on the right hand.
PORT - B - Floating Type: ACT N ACT
- A - Spring Type: ACT N ACT
z
Connect the implement to the remote couplers adequately.
Remote valve couplers.
Remote control levers.
5 - Warning: Never use the diff-lock at high speed or on the road as this can cause rollover and injury.
SAFETY PRECAUTIONS
39