Zetor HORTUS HS CL, Operator'S Manual

Page: 58 / 142

Creep Shift Lever
2. Creep speed should not be used for any of the following:
z
Pulling a trailer
z
Front loader operation
z
Front blade operation
z
Earth-moving
z
Entering and leaving a field
z
Loading onto and unloading from a truck
3. To avoid personal injury:
z
When you leave the tractor, be sure to apply the parking brake and stop the engine
z
In applying the brakes:
- The torque of wheel axle is extremely high while creep speed is being used.be sure to step down on
the clutch pedal completely before applying the brakes, or they will not work.
- When starting to operate the tractor, be sure to release the parking brakes. Misuse of the brakes
may cause damage to the transmission and is therefore not acceptable to Zetor for coverage under
the warranty.
4. 'M' or 'H' of sub shift can not be engaged while the 'Creep' is on.
Important: Press the clutch pedal completely down and stop the tractor's motion before
shifting the creep speed gear lever.
1 - Creep Shift Lever
Shift the creep shift lever at ''Off'' to high speeds and shift
it ''On'' to obtain low speeds.
The shifting requires clutch operation.
1. Creep speed (Attained by shifting the creep gear
shift lever to ON) should be used only when doing
one of the following jobs:
z
Deep rotary-tilling and harrow
z
Planting
z
Turf application.
HODP065
DESCRIPTION OF TRACTOR CONTROLS
57