18
4.2.3
“Offset” tab
The ”Offset” tab contains information of the parameters specified in
Table 4.3
Table 4.3 Parameters of the “Offset” tab.
Parameter
Possibility of
configuration
Admissible
values
Description
Offset
status
Yes
off
on
If the “Offset” option is disabled, the values by
X and Y axes are set to zero. The offset value is
displayed in the field “Displacement by axis” of
the “Settings” tab.
As the “Offset” function is disabled, the values
remain unchanged.
Offset (in
measurem
ent units)
No
−
The value to be used for modulus in the case
of offset option activation.
Figure 4.3
shows an example of the “Offset” tab
Figure 4.3 “Offset” tab
