13
4
Digital inclinometers: parameters configuration
Note! The Manufacturer reserves the right to change the version of digital transducer’s
software version. The sequence of software version updates up to the current version is described
in the document «Software_Service work with ZET7ххх.pdf».
4.1
Configuration of interface part of the digital inclinometers
Configuration of interface part should be performed in accordance with the instructions
specified in the document «Configuration of interface part of the intellectual modules of ZET7ххх
series».
Please note that it is necessary to set unique address for every device in the measuring network
in the section «Address (node) from 2 up to 63» of the “Information” tab. In order to secure normal
operation of the measuring network, it is necessary to make sure that all the devices of the measuring
network have unique addresses. The addresses are set in the range from 3 up to 63.
Note: digital transducers ZET 7х54 consist of two channels (channels names by default are
as follows: «Axis X», «Axis Y»), corresponding to the two measuring axes. When assigning the
addresses, please note that the channels of digital transducers ZET 7154 have two addresses in the
measuring network, while the channels of digital transducers ZET 7054 are assigned a common
address.
