Zeroplus LAP-F1 User Manual Download Page 93

Page: 93 / 140

LAP-F1 Logic Analyzer

User Guide v1.6

| www.zeroplus.com.tw

Figure 4-42 Boolean waveform example: A0 AND A1

4.35.

Noise Filter

The Noise Filter is used to filter out short-lasting pulses or dips in signals that the

user considers to be noise; see the dialog box in Figure 4-43.

After activating the Noise Filter, users select one or more channels to be filtered and

move them to the right column using the right-pointing arrows. To select two or

more channels at the same time, use the CTRL and SHIFT keys.

Once a channel is in the right column, the user can choose just how short pulses/dips

in the signal of that channel have to be to be filtered out. Lengths are measured in

sample points or time.

Summary of Contents for LAP-F1













































































































































Search results

Summary of Contents for LAP-F1

Reviews:

Related manuals for LAP-F1

Brands by name

Popular brands

Zeroplus LAP-F1, User Manual

Search results

Summary of Contents for LAP-F1

Reviews:

Related manuals for LAP-F1

Brands by name

Popular brands