LAP-F1 Logic Analyzer
|
User Guide v1.6
| www.zeroplus.com.tw
126
Figure 4-79 Statistics window example showing an SPI protocol
Item
Description
Channel Selection; see the dialog box in Figure 4-80.
Customize; decide which counters to show; except Probe (name) all
parameters are selected by default; see the dialog box in Figure 4-81.
Filter; only count periods that fit the filter conditions. This function is not
activated by default; see the dialog box in Figure 4-82.
Highlight signals; mark channels that don’t fit the filter conditions in red;
see the dialog box in Figure 4-83.
Refresh; re-run the counters if there has been any change to the acquisition
or the settings.
Count full
periods
only
Periods that don’t have both a rising and a falling edge will not be counted.
Table 4:52 Statistics window description
