LAP-F1 Logic Analyzer
|
User Guide v1.6
| www.zeroplus.com.tw
55
on the Trace Information.
Number of
samples
Show number of samples between two edges.
Time
Show the time between two edges.
Don’t show values No information is shown inside the traces; this is the default option.
Waveform Settings
Trace Height
Set the trace amplitude from 22 to 180 px; the default is 26.
Font Size
Set the font size from 6 to 60. The default is 12.
Waveform Mode
Choose between saw tooth- and square-shaped traces.
Ruler Mode
Fixed
The center of the screen is fixed at 0 sec.
Samples/Time
Second is defined as the trigger event; this is the default option.
Bar
Snap to edges
Bars snap automatically to the nearest trace edge when being
repositioned.
Center display
around the T-bar
Center the waveform area around the T-bar when the trigger
condition is met.
Table 4:11 Waveform settings dialog box description
4.11.6.
Hot Keys
In ZP-Logic, Hot Keys are keyboard combinations that invoke a function. See
錯誤
!
找不到參照來源。
for a complete description of all Hot Keys. Figure 4-12 shows the
dialog box used to customize the Hot Keys.
