Zero UAV (Beijing) Intelligent Technology Co., Ltd. 43
–
On an Android ground station: click the "default" button in the “parameter" interface.
–
On a PC ground station: select "settings" → "parameter setting", pop out the parameter setting window and click the
“restore default" button.
c.
For safety reasons, when in settings status it is not possible to start the motors.
d.
It is only possible to exit return-to-land mode after switching back to manual operation.
e.
Do not reduce the throttle to minimum when in manual flying mode. Doing so will cause the motors to stop and the
aircraft to crash.
f.
If the aircraft is not stable in manual mode do not switch to GPS mode as this will make it even more unstable.
NOTE:
According to your preference you can select to use a single remote control or two remote controls to operate. The
method for switching between these modes is explained at step 6 in “Energizing”.
This manual is only aimed at introducing for professionals, the Zero UAV Z-series gimbals. For other basic flight
operations please refer to the Gemini flight control manual
