14
Controlling your Rapture Drone
Trimming
Trimming is used to balance the Rapture drone when the light is off centred.
Please check before attempting to use trimming that the Rapture drone’s light is
not being affected by outside forces such as wind.
Trimming Pitch
Trimming Roll
Trimming Yaw
360º Flipping
The Rapture drone is capable of performing 360° lips. This is possible by using the
Flip button (15).
To Perform a forward lip push the Flip Button (15) on the back side of the Remote
Controls Right handle. This will launch the Rapture drone forward into a forward lip.
Please ensure that you have a 2 metre clearance below, and in all directions around
the drone before attempting to lip as this manoeuvre requires considerable space.
Flips will be deactivated when the Rapture drone has low power, and will be
reactivated once the battery is charged.
To trim the Rapture drones’ pitch, use the
Pitch Trim Controls (5) which are the top
and bottom buttons below the Right
Thumbstick. This will balance the forward
and back movement of the Rapture drone.
To trim the Rapture drones’ roll, use the
Roll Trim Controls (5) which are the left
and right buttons below the Right
Thumbstick. This will balance the left
and right movement of the Rapture drone.
To trim the Rapture drones’ Yaw, use the
Yaw Trim Controller (4) which is the small
switch on the Remote Control below the
Left Thumbstick. This will balance the left
and right spin of the Rapture drone.
Summary of Contents for Rapture ZXRAP
Page 1: ...USER MANUAL PRODUCT CODE ZXRAP www zero x com au www zero x co nz RAPTURE DRONE ...
Page 2: ......
Page 23: ......
