Know Your BABY ELFIE
BABY ELFIE x1
（
Battery included
）
A.Press both ends of battery at the bottom of
the drone.
B
.
Unplug the power connector to remove the
battery.
Backup propellers x4
Upper casing
Lower casing
Propeller
Up cover of arms
Down cover of arms(A)
Down cover of arms(B)
2
1
2
3
4
5
6
16
7
8
9
17
18
19
!
!
USB charger x1
User manual x1
Headless mode
Protective bag x1
Circuit board
Motor
Gear
Flashing lights
Lampshade
Camera
3.Gravity Sensing Control
10
11
13
14
12
15
3
3
4
4
5
Emergency stop
5
6
7
7
1
2
3
4
5
6
7
8
9
10
11
12
3
8
9
12
10
11
4
5
7
2
1
6
Camera
1
1
2
2
A
A
B
B
Release screws with
screwdriver counter-
clockwise and pull out the
propellers, install the
propellers correspondingly
and screw on clockwise.
1
2
2.Joystick
Use the joystick to control the flight altitude and
left /right turn.
1
2
1
Joystick
(one press to start/
press again to land)
High/Low speed
Calibration
(long press for
2 seconds)
Joystick (one
press to start/
press again to
land)
Calibration
(long press
for 2 seconds)
6 Light control
Power switch
FLY WITH REMOTE CONTROL
②
Push the joystick
（
throttle
）
to the top and
then pull back to the bottom. After the sounds of
Di-Di, the flash of indicator lights of remote control
and LED lights of drone will turn to constant lights,
which means the pairing completes.
20
21
23
24
25
26
22
Remote control x1
iOS
JJRC
Android
Android
（
Google Play
）
FLY WITH APP
1
2
2
2
2
2
3
3
3
1
1
1
1
1
MINI FOLDABLE DRONE WITH
DUAL REMOTE CONTROL MODE
AGE 14+
*Please read this manual carefully before operation and keep it
properly for future reference.
BABY ELFIE
2
Wi-Fi
JJRC-#####
MINI FOLDABLE DRONE WITH
DUAL REMOTE CONTROL MODE
AGE 14+
*Please read this manual carefully before operation and keep it
properly for future reference.
BABY ELFIE
②
Loading Batteries
Operating Precautions For Gravity
Sensing Remote Control
+
-
1.5V“AAA”
+
-
1.5V“AAA”
①
②
3m
Emergency
stop
180°
With 2.4G frequency band for long remote control
distance, BABY ELFIE allows multiple flights at the
same time without any interference. User can fly it
with gravity sensing remote control, or control it to
fly, roll, hover and take photos/videos with APP and
WIFI connection on smart phone.
Accessories
PRE-FLIGHT PREPARATIONS
1.Flight Environment
Indoor: Spacious spaces away from barriers,
crowds or pets are preferred.
Outdoor: Sunny, windless and breezy weathers
are preferred.
Please keep the drone in sight during the flight
and keep it away from barriers, high-tension
cables,trees and people.
Do not fly in extreme environment, such as
hotness, coldness, strong wind or heavy rain.
Unfolding Sequence:
①
Unfold the rear crankshafts.
②
Unfold the front crankshafts.(Near the camera)
Fold the crankshafts in reverse order.
2.Unfold Crankshafts
3. Propellers Installation
A corresponds to A
B corresponds to B
When installing or dismantling the propeller,please
do not exert force on the propeller to avoid distortion.
Notes:
Notes:
Front
4.Battery Installation of Drone
C.Connect USB charging cable with the
charging interface of the lithium battery.
KNOW THE REMOTE CONTROL
2.Pairing Remote Control With Drone
①
Turn on the power of the drone; put the drone on
plain ground; check whether the indicator lights of
remote control and LED lights of drone flash.
Ascend
Descend
Turn Right
Turn Left
Forward
Backward
Left
Sideward
Right
Sideward
4.Hover
KNOW YOUR REMOTE CONTROL
APP
1.Wifi Connection
①
Use your phone to scan the QR code, download
and install the control software: ‘JJRC’. Android,
Android(Google Play) and iOS are all supported.
Setting
②
Turn on the drone and the lights will flash;turn on
your mobile phone to connect WIFI (JJRC-
#####), as shown in figure.
2.APP Interface Instruction
Return
Photo
Video
Document
（
album/video
）
Speed Control:
30%/60%/100%
Altitude Hold
Gravity Sensor
Control
Show/Hide
Steering Wheel
More Settings
360°Flips&Rolls
One-key Start
One-key
Landing
Camera Reverse
3D Display
Headless Mode
One-key Reset
Emergency Stop
Flight Planning
Left Joystick
（
throttle
）
Right Joystick
（
rudder
）
Left/Right Rotation
Fine-tuning
Left/Right Side Fly
Fine-tuning
Forward/
Backward
Fine-tuning
2.One-Key Start
Click "One-key Start" to activate the motor and
propellers.
Ascent
Descent
Left Joystick
Turn Right
Turn Left
Right Joystick
Backward
Forward
Right Side
Flight
Left Side
Flight
3.Basic Flight
Use the left joystick to control the flight altitude and
turn left/right, and the right joystick to control the
forward, backward, left and right side flight
directions.
When you release the left joystick (throttle) after
the ascent/descent action, the drone will hover at a
certain height.
Hover
4.Take Selfies
In the Altitude Hold mode, you can control the
drone to turn the camera back to itself, then click
the camera button on the screen to take selfies.
Gravity Sensor Control: Click to enter Gravity
Sensor Control, put your right hand thumb on the
right joystick, and move the phone towards any
direction for remote control.
5.Gravity Sensor Control
6.Fine-Tunning
If the drone rotates or yaws, click the fine-tunning to
the reverse direction of yawing till the yaw is
adjusted and the drone stays oriented at the control.
Left Rotation
Fine-tuning
Right Rotation
Fine-tuning
Forward
Fine-tuning
Backward
Fine-tuning
Left Side Fly
Fine-tuning
Right Side Fly
Fine-tuning
7.One-Key Reset
When deviating from course due to crash, please
control the drone back to a horizontal plane and
click "One-key reset" for gyro calibration and
take-off again.
Notes:
Attention: When the drone is within 30cm from
the ground, it will be affected by the blade vortex
made by itself and become unstable. This is
"ground effect".The lighter the drone is,the
greater the effect will be.
8.Flight Planning
When the drone takes off, click "flight planning"
button to activate flight path mode. Draw a path in
the blank, and the drone would perform the flight
path at the altitude as you pilot and fly on its own.
9.Beauty Mode
The built-in beauty mode on camera can
automatically beautify images to deliver improved
and stunning images with outstanding
qualities.
After
Before
FAQ
PROBLEMS
CAUSES
SOLUTIONS
Control
failure
Not connect with
the quadcopter
battery.
Connect the
quadcopter battery
in right way.
Too strong wind
force.
Do not fly in windy
days. The
performance and the
control of the
quadcopter will be
affected by the
strong winds.
Fail to
ascend
The rotation
speed of main
blades is too slow.
Push up the throttle
joystick.
The battery of the
quadrocopter is
not fully charged.
Please full charge
the quadcopter.
Landing
too soon
Out of
control
The throttle stick is
pulled down too fast.
Pull down the
throttle stick
slowly to perform
a smooth landing.
Beyond the effective
controlling distance.
JJRC TECHNICAL SUPPORT
Dear Customer,
Thank you for choosing JJRC product. Please
visit JJRC official website for more FAQ and
information if there is any problem of using our
product.
-Product Operation: Please visit JJRC College
for tutorial video or user manual.
-Product Features: Please refer to product page
description or product brochure.
-After-sale Service: Please refer to conditions
and terms of after-sale service.
The final interpretation right belongs to all JJRC.
Should you have any further questions, please
visit JJRC Online Feedback and leave your
message.
Thank you again for your support!
JIANJIAN TECHNOLOGY CO.,LTD.
www.jjrc-tech.com
①
Hold the controller in horizontal position without
any tilt before starting your flight.
②
Keep the drone at least 3 meters away from you
for the first time you try gravity sensing controller.
③
When you hold the controller upwards and it
faces to you right ahead, the drone will fly
backward towards your position. Please operate
it carefully in this state to avoid being hit by
drone and/or other accidents.
④
In case of emergency, press “Stop” button
immediately.
Before flying, hold the controller in horizontal
position.
①
Press “Calibration” button for routine calibration.
②
Press “One-key Start” button, push the joystick
forward lightly to fly the drone.
Tilt the controller to control the drone flying forward/
backward or left/right sideward.
1.Battery Installation of Controller
①
Opening Battery Cover
The battery box is located at the controller bottom,
open the battery cover by sliding upper cover
forward and lower cover backward hard.
Different from ordinary remote control, this is a
gravity sensing controller, which enables you to
hold it in one hand and tilt it for drone direction
control. For novice user who tries gravity controller
for the first time, please read the user manual and
operate it carefully.
1.One-Key Start
When you release the left joystick (throttle) after the
ascent/descent action, the drone will hover at a
certain height.
1.Remote Control Frequency Pairing
LED lights on when charging, LED lights off when
finish charging. Charging time is about 60 minutes.
Calibrate the drone when it cannot vertically
ascend. Press “Calibration”button and the
indicator light of drone starts flashing. Then
release all the buttons till the flash of the drone’s
indicator light turns to constant light. Thus the
calibration completes.Ensure the whole process
of calibration is operated under horizontal and
steady circumstances.
3.Calibration of Remote Control
Click
①
“ON”, then click
②
“Altitude Hold” for remote
control frequency pairing.
Open the cover of battery compartment, insert two
AAA batteries (not included)
1. Ensure the polarity symbols on the batteries
match the symbols inside the battery
compartment.
2. Do not mix new and old batteries.
3. Do not mix different types of batteries.
Notes
：
AAA batteries*2
Ensure that the
flying distance is
within 30 meters.
②
①
There is a certain risk when using lithium
battery. It may cause fire, body injury or
property loss. Users must be aware of the
risks and take full responsibility of using
battery improperly.
If battery leakage occurs, please avoid
contacting your eyes and skin with
electrolyte. Once it happens, please wash
your eyes with clean water and seek medical
care immediately.
Please remove the plug immediately if you
sense any peculiar smell, noise or smog.
Battery Charging
Please use the charger from original factory
to ensure your safe usage.
Do not charge dilatant or outworn battery.
Do not over charge battery. Please unplug
the charger once fully charged.
Do not charge the battery next to
inflammables, such as carpet, timber floor or
wood furniture or on the surface of
electro-conductive objects. Please always
keep an eye on the battery when charging.
Do not charge battery which not cool down
yet.
The charging temperature should be
between 0
℃
to 40
℃
.
Battery Recycling
Do not dispose the battery as daily rubbish.
Please familiarize yourself with the local
garbage disposal method and dispose it
according to the special requirement.
Battery Instructions
Please check the number of accessories carefully
(as shown above).Please provide proof of
purchase and contact the store for replacement if
any missing parts.
Notes:
