Zero Motorcycles DS 2021, Owner'S Manual

Page: 93 / 160

General Maintenance
6.21
Headlight Alignment
The headlight should be checked for correct alignment
periodically. It must be aligned any time the suspension sag is
adjusted because this affect s the headlight alignment. Before
the headlight can be aligned, the suspension sag and tire
pressure must be correctly adjusted. The headlight can be
adjusted vertically. If the vertical adjustment is off, it causes the
beam to point too close to or too far ahead of the motorcycle.
With the headlight on the low beam position, the motorcycle
perpendicular to the ground, and the operator sitting on the
motorcycle, verify the beam alignment. The motorcycle is
shipped with the headlight at a 0.5-2.5% dip.
The adjustment screw (A) is located on the back upper right
corner of the headlamp. To adjust the headlight, turn the screw
until the correct beam alignment is achieved.
Zero Owner's Manual (S and DS).book Page 21 Monday, September 21, 2020 11:43 AM