manualshive.com logo in svg

Zero Motorcycles DS 2021, Owner'S Manual

Share
Download
Zero Motorcycles DS 2021 Owner'S Manual Download Page 67

Power Pack and Charging

5.5

Quick Charging (Off-Board Accessory Charger)

The “scalable” quick charging feature allows up to four 
supplemental accessory chargers (in addition to the existing 
integrated charger) to be connected to the motorcycle. Use of 
supplemental accessory chargers can reduce the charging time 
by up to 75%.

Note: The time for charging the motorcycle using quick charging 
will vary with the number of chargers used.

The accessory charging  connector is located above the motor. 
For more information on how to connect additional chargers, 
refer to the quick charger’s owner’s manual.

WARNING:

 Only use Zero approved accessory chargers. 

Damage, malfunctions, or performance problems caused by the 
installation or use of any charger not sold or approved by Zero 
will void the warranty of your Zero Motorcycle.

A.

AC Power Cord

B.

AC Power Cord Connection

C.

Power Pack Charger

D.

Charger LED Indicators

E.

Connector (to motorcycle)

Zero Owner's Manual (S and DS).book  Page 5  Monday, September 21, 2020  11:43 AM

Summary of Contents for DS 2021

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands