32
5. Electrical installation
A controller must always be fitted on the side that
is facing away from traffic in motion. If there is a
need for a controller on the opposite side, a fur-
ther controller must therefore be fitted. Fitting on
the other side involves increased risk of injury.
m
WARNING!
Installing control device
Control devices
1. Fit the control devices in the desired locations.
They must be positioned so that the operator is in
the safest possible location and has a clear view
of the load, the tail lift and the surrounding area.
2. The distance between the vehicle’s rear
edge and the centre of the controllers must
be between 300 mm 600 mm. See image.
All cable inlets must be pointing downwards.
NOTE.
3. The control device’s cable is connected to the
control card.
Installing the control device.
300mm - 600mm
