30
2
3
5
4
Pict. 11
Ring
Lock nut
Adjustable collar
Lock screw
Run the lift up so that the lift is at the floor level, see
pict 9.
Loosen the ring's lock screw (2). Screw the ring out
in the direction of the platform (3). See pict 10.
Tilt down the platform to maximum 10 degrees under
horizontal (or any other required tilt angle).
As per pict 9.
Adjust the ring to the top of the cylinder (4).
Tighten the lock screw in the ring (5). See pict 11.
Test run all functions.
Adjustment of tilt down angle.
Pict. 9
Pict. 10
4. Slider installation
