25
b. “Ease” the square edges; that is, strike off the sharp square edge the mill applied to the
wood.
72
Your finish ingredients cannot accumulate on a sharp edge. Don’t use the orbital for
this, at least not for the inside edges; sand the square edges by hand only. The orbital is likely
to chew up the inside corners.
c. Sand the two exposed faces of the ports and ease the edges.
73
Be thorough! The better job you do here will strongly influence how uniform your stain turns out.
3. Remove the dust: blast it with compressed air, remove it with a shop-vac, or wipe with a clean
rag.
74
72
73
74
Summary of Contents for 1x8 Cabinet
Page 52: ......
