13
8. Grab your drill with the 1/16 bit set to stick out about 1-1/8”, and drill two pilot holes at the
marks, through the cleat and into the side.
21
9. Label the cleat and the side, so you can put it back in place later.
22
Set the cleat aside.
10. Repeat steps 7 - 9 for the remaining three cleats.
23
11. Re-drill the eight pilot holes in the cleats with the 9/64
bit and countersink them using your chosen method.
24, 25
21
22
24
25
23
TIP:
You will get
cleaner holes on the inside
face of the cleat if you can go
straight through into another piece
of wood.
Summary of Contents for 1x8 Cabinet
Page 52: ......
