11
4. With scissors or blade and ruler, cut out the templates provided with your kit.
11
Tape the templates
to the cabinet bottom, and to the right-hand side (as you face the front), and to one of the ports.
12
If the templates do not match the wood size PERFECTLY (it happens), line up the FRONT EDGE of
the template to the FRONT EDGE of the wood, and center it along the length of the wood. Don’t
worry about the REAR edge.
5. With the awl, or a nail and small hammer, carefully poke a hole into the wood at the center of
each cross hair.
13
Remove the template from the right side, and tape it to the LEFT side and mark
that piece as well.
14
Re-use the Port template to mark the other Port.
15
Poke holes centered on the
four marks you made around the port hole.
16
Remove all templates and tape. Keep the templates
close at hand for reference.
11
12
13
14
15
16
Summary of Contents for 1x8 Cabinet
Page 52: ......
