32
a. Set the grill cloth face-down on the table. The face is the side with a distinct grid pattern and
broken black lines. Set the baffle board black-side-down neatly centered on the grill cloth.
Align one of the edges of the baffle board with one of the silver lines about an inch from the
edge of the grill cloth. Remove the baffle board and fold the cloth over on that silver line and
crease it the entire length of the grill cloth. The bent edge should be at a 90 degree angle.
b. Place the baffle board back on the grill cloth (with the edge against the fold) and center the
board on the cloth.
102
Now pick out a black line closest to one of the adjacent edges. Remove
the baffle board, and use scissors or a razor to cut the grill cloth along the folded crease to
the chosen black line.
103
DO NOT OVER CUT THIS LINE. Fold over the grill cloth at the black
line and crease it to 90 degrees along the entire length of the cloth.
104
98
99
100
101
102
103
104
Summary of Contents for 1x8 Cabinet
Page 52: ......
