Fixed Hoist Test Facility Operation and Maintenance Manual
ZOM-12000-2 rev 0
Page 8 of 20
This manual contains proprietary information and is not to be copied or disclosed without written
permission from Zephyr International LLC. Copyright 4-1-2006
Hanging Hoist Mount
Figure 11
Lift the hanging hoist mount assembly into place and attach it to the I beam with the
adjustable cam followers provided. As shown on figure 9 and 10
Adjust the (4) adjustable cam followers so there is .002 to .005 inches clearance
between the inside face of the I-Beam and the cam follower.
Attach an extension cord to the hoist and lower the chain to
attach the hanging hoist mount. Raise the hanging hoist
mount and verify it raises and lowers smoothly with no
binding. As shown on figure 11.
Figure 9
Hanging Hoist Mount Assembly
Figure 10
Cam Followers
