Zennio GetFace IP
http://www.zennio.com
Tecnical Support
:
http://support.zennio.com
7
2.2
APPLICATION CASES
The most typical network topologies where Zennio GetFace IP can be installed are
outlined in this section.
2.2.1
SINGLE-FAMILY HOMES
For an individual housing environment that requires completely independent video-call
systems, the typical installation will be one of the two shown in Figure 2 -- this will
depend on whether direct interconnection between Zennio GetFace IP and the touch
panel is possible or, alternativelly, on whether both devices are being connected
through an indoor router (provided, for example, by the Internet service provider).
If needed, a network switch that expands the number of available LAN interfaces can
be connected to the router, so multiple Z41 COM can be incorporated to the system.
Figure 2
Single-family home installation.
2.3
APARTMENT BLOCK
In the case of an apartment building equipped with a common Zennio GetFace IP
intercom for all of them, a community network infrastructure (firewall-managed) will be
required to interconnect the video intercom with each apartment. As in 2.2.1, each of
aparments may or may not have its own Internet connection router.
Figure 3 shows a good example of this type of topology: VLAN labelling is used as
traffic insulation between each dwelling.
Connected to Internet
UTP CAT-5
Not connected to Internet
UTP CAT-5
