Zennio GetFace IP
http://www.zennio.com
Tecnical Support
:
http://support.zennio.com
37
interface can be customised too.
3.2.4
HARDWARE
The following items can be configured in the
Hardware
section:
3.2.4.1
AUDIO
Figure 31
Audio.
Master Volume
: audio volume level for both calls and signals (ringtones).
Adaptive Volume
: if enabled, a
Maximum Gain
and a
Sensivity Threshold
will be parameterisable. The latter defines the volume level that will trigger the
adaptive volume increase. On the other hand, even if this option is left
disabled, the
Current Noise Level
and the
Current Adaptive Gain
can be
consulted here.
Phone Call Volume
: defines the volume of the ringtones as well as of the
call-progress tones, i.e., of the dial and busy-line tones.
Signalling Volume
: sets the volume of the key beeps, the warning tones and
the switch-activation tone, as well as the user sounds to be played back.
