Zennio GetFace IP
http://www.zennio.com
Tecnical Support
:
http://support.zennio.com
26
There are two ways to configure these cards:
By automating the process through an RFID card reader for PC (ZVP-
RFUSB)
.
This requires installing the card reader driver, available at
http://www.zennio.com
, and entering the web interface of a Zennio GetFace
IP with the ZVP-RFSMN module installed. By pressing on the icon shown in
Figure 18, the field will be directly filled in with the code of the card being read
by the reader (a green LED will be turned on to indicate that the card can be
placed over the reader).
Figure 18
Card reading.
If no RFID card reader is available for the PC, the assignment can still be
performed manually. For adding up a new card, it is necessary to provide its
ID. This card ID can be obtained by swiping the card over the reader module
and consulting the card reading log in
Status
Acces Log
:
Figure 19
Access Log.
User card registration must be done in
Directory
Users
.
The ID just obtained
should be entered into the corresponding textbox.