Zennio GetFace IP
http://www.zennio.com
Tecnical Support
:
http://support.zennio.com
24
3.1.7
TAMPER SWITCH CONFIGURATION
The
tamper switch
does not require extra configuration. The function of this accessory
is warning when the video intercom is being manipulated. For that purpose it must be
connected to a KNX input or any monitoring system. That connection will remain closed
after the Zennio GetFace IP frame has been installed. On the other hand, it will be
open once the frame gets removed.
3.1.8
ACCESS CONFIGURATION WITH TOUCH-DISPLAY
The Touch Display module (ZVP-TOUCH) allows making phone calls an opening the
lock. To configure this module it is necessary to enter the
Hardware
Display
section
from the web
interface.
DISPLAY
The basic settings are configured in this section.
Language Settings
: sets the main language for the on-screen controls.
Phone Book Displayed
: allows providing an orderly user phone book
through the Touch Display.
Keypad Displayed
: enabling this option activates the keypad that allows
making phone calls and opening the lock. The configuration of the directory is
analogous to that for the ZVP-KEYPAD module (see section 3.1.3.1).
Dial Numbers by Keypad
: allows calling users by dialling their virtual
numbers on the keyboard. If no virtual numbers have been configured please
leave this option disabled.
Slideshow Screen Activation Timeout
: time in seconds the Touch Display
should be inactive before the screensaver slideshow stars.
Slideshow Transition Time
: time between slides.
