Zennio ZVP-CAM User Manual Download Page 42

Page: 42 / 45

Zennio GetFace IP

http://www.zennio.com

Tecnical Support

http://support.zennio.com

3.2.5

SYSTEM

The main system configuration is established in the following sections.

Figure 36

System.

3.2.5.1

NETWORK

Parameters related to the device network interfaces are set in this section.

BASIC

Zennio GetFace IP works by default with a static IP. However, it is possible to configure

it to work with a DHCP server.

Being the DHCP option deactivated, it is possible to configure the following options:

Manual Settings

: allows setting a static IP address, the network mask and

the default gateway. Also a primary and a secondary DNS servers can be

configured.

Network identification

sets the

device hostname (optional).

VLAN Settings

allows enabling a virtual local area network (VLAN).

Summary of Contents for ZVP-CAM














































Search results

Summary of Contents for ZVP-CAM

Reviews:

Related manuals for ZVP-CAM

Brands by name

Popular brands

Zennio ZVP-CAM, User Manual

Search results

Summary of Contents for ZVP-CAM

Reviews:

Related manuals for ZVP-CAM

Brands by name

Popular brands