ZoningBOX 6 / ZoningBOX 4
Technical Support:
23
➢
Type
[
No cyclic
/ Cyclic
]: indicates whether the step control will be cyclic or
not.
Enumeration Control (1 byte)
[
disabled
/enabled
]: enables the
“[Unit x]
Fan: Enumerated Control
” 1-Byte object, which represents each fan level by
integer values between 0 and 3 (or 0 and 2, when corresponding).
Percentage Control (1 byte)
[
disabled/
enabled
]: enables
the “
[Unit x] Fan:
Percentage Control
” object, intended for the reception of the fan speed
levels as percentage values, according to Table 4 y Table 5.
STATUS OBJECTS
Individual Speed Objects (1 bit)
[
disabled
/enabled
]:
enables one binary
object per fan speed available.
Enumeration Object (1 byte)
[
disabled
/enabled
]:
enables the “
[Unit x] Fan:
Speed Enumeration (Status)
” 1-Byte object, which will adopt values
between 0 and 3 (or 0 and 2) depending on the current fan speed.
Percentage Object (1 byte)
[
disabled/
enabled
]:
enables
the “
[Unit x] Fan:
Speed Percentage
” object, which will adopt percentage values according to
HVAC UNIT “x”
Figure 20
– Fan – Unit HVAC
