inBOX 24 / inBOX 20
http://www.zennio.com
Technical Support:
http://support.zennio.com
7
0
” and “
Reset 1
”), which will be sent to the KNX bus with values “0” and “1”
respectively whenever the device begins operation (for example, after a bus
power failure). It is possible to parameterise a certain
delay
to this sending (0
to 255 seconds).
Figure 3.
Sending of Indication objects on bus voltage recovery
Heartbeat (Periodical Alive Notification)
: this parameter lets the integrator
incorporate a one-bit object to the project (“
[Heartbeat] Object to Send ‘1’
”)
that will be sent periodically with value “1” to notify that the device is still
working (
still alive
).
Figure 4
. Heartbeat (Periodical Alive Notification).
