inBOX 24 / inBOX 20
http://www.zennio.com
Technical Support:
http://support.zennio.com
9
2.2.2
TEMPERATURE PROBE
Please refer to the specific user manual “
Temperature Probe
”, available in the inBOX
24 product section, at the Zennio website (
www.zennio.com
).
2.2.3
MOTION DETECTOR
It is possible to connect motion detectors (models
ZN1IO-DETEC-P
and
ZN1IO-
DETEC-X
from Zennio) to the input ports of inBOX 24.
Please refer to the specific user manual “
Motion Detector
”, available in the inBOX 24
product section, at the Zennio website (
www.zennio.com
).
Notes
:
The ZN1IO-DETEC-P motion detector is compatible with a variety of Zennio
devices. However, depending on the device it is actually being connected to,
the functionality may differ slightly. Therefore, please refer specifically to the
corresponding product section to obtain the aforementioned document.
Motion detectors with references ZN1IO-DETEC and ZN1IO-DETEC-N
are
not compatible
with inBOX 24 (may report inaccurate measurements if
connected to this device).
When connected to inBOX 24, the rear micro-switch of model ZN1IO-DETEC-
P should be set to position “
Type B
”.
