Zennio ZIO-IB24, User Manual

Page: 17 / 29

inBOX 24 / inBOX 20
http://www.zennio.com Technical Support: http://support.zennio.com
17
Trigger Value : sets the value (“0”, “1” or “0/1”, being the latter the default
option) that will trigger, when received through “ [ML] Trigger ”, the master
action (the general switch-off or the courtesy switch-on).
General Switch-Off .

Delay : defines a certain delay (once the trigger has been received) before
the execution of the general switch-off. The allowed range is 0 to 255
seconds.

Binary Value : if checked, object “ [ML] General Switch-off: Binary
Object ” will be enabled, which will send one “0” whenever the general
switch-off takes off.

Scaling : if checked, object “ [ML] General Switch-off: Scaling ” will be
enabled, which will send a percentage value (configurable in “ Value ”)
whenever the general switch-off takes off.

Scene : if checked, object “ [ML] General Switch-off: Scene ” will be
enabled, which will send a scene run / save order (configurable in “ Action ”
and “ Scene Number ”) whenever the general switch-off takes off

HVAC : if checked, object “ [ML] General Switch-off: HVAC mode ” will be
enabled, which will send an HVAC thermostat mode value (configurable in
“ Value ”, being the options “Auto”, “Comfort”, “Standby”, “Economy” and
“Building Protection”) whenever the general switch-off takes off
Note : the above options are not mutually exclusive; it is possible to send
values of different nature together .
Courtesy Switch-On :
The parameters available here are entirely analogous to those already
mentioned for General Switch-Off. However, in this case the names of the
objects start with “ [ML] Courtesy Switch-On (…) ”. On the other hand,
sending scene save orders is not possible for the courtesy switch-on (only
orders to play scenes are allowed).
Note : object “[ML] Courtesy Switch-On: Binary Object” sends the value “1”