Zennio ZIO-IB24, User Manual

Page: 27 / 29

inBOX 24 / inBOX 20
http://www.zennio.com Technical Support: http://support.zennio.com
27
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Long Press] Dimmer ON Sending of 1 (ON)
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Long Press] Dimmer OFF Sending of 0 (OFF)
1 Bit I C T - W - DPT_Switch 0/1 [Ix] [Long Press] Dimmer ON/OFF Switching 0/1
1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Ix] [Long Press] Run Scene Sending of 0 - 63
1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Ix] [Long Press] Save Scene Sending of 128 - 191
1 Bit O C T R - - DPT_Alarm 0/1
[Ix] [Switch/Sensor] Alarm: Breakdown or
sabotage
1 = Alarm; 0 = No Alarm
2 Byte C T - - - 9.xxx
-671088.64 -
670760.96
[Ix] [Long Press] Constant Value (Float) Float value
2 Byte C T - - - DPT_Value_2_Ucount 0 - 65535 [Ix] [Long Press] Constant Value (Integer) 0 - 65535
1 Byte C T - - - DPT_Scaling 0% - 100% [Ix] [Long Press] Constant Value (Percentage) 0% - 100%
1 Byte C T - - - DPT_Value_1_Ucount 0 - 255 [Ix] [Long Press] Constant Value (Integer) 0 - 255
285, 291, 297, 303 1 Bit C T - - - DPT_Trigger 0/1 [Ix] [Long Press/Release] Stop Shutter Release -> Stop Shutter
286, 292, 298, 304
1 Byte I C - - W - DPT_Scaling 0% - 100% [Ix] [Long Press] Dimming Status (Input) 0% - 100%
1 Byte I C - - W - DPT_Scaling 0% - 100% [Ix] [Long Press] Shutter Status (Input) 0% = Top; 100% = Bottom
305 1 Byte I C - - W - DPT_SceneControl 0-63; 128-191 [Motion Detector] Scene Input Scene Value
306 1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Motion Detector] Scene Output Scene Value
307, 336, 265, 294 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] Luminosity 0-100%
308, 337, 366, 395 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Open Circuit Error 0 = No Error; 1 = Open Circuit Error
309, 338, 367, 396 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Short Circuit Error 0 = No Error; 1 = Short Circuit Error
310, 339, 368, 397 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] Presence State (Scaling) 0-100%
311, 340, 369, 398
1 Byte O C T R - - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Protection
[Ix] Presence State (HVAC)
Auto, Comfort, Standby, Economy, Building
Protection
312, 341, 370, 399 1 Bit O C T R - - DPT_Occupancy 0/1 [Ix] Presence State (Binary) Binary Value
1 Bit O C T R - - DPT_Trigger 0/1 [Ix] Presence: Slave Output 1 = Motion Detected
313, 342, 371, 400 1 Bit I C - - W - DPT_Window_Door 0/1 [Ix] Presence Trigger Binary Value to Trigger the Presence Detection
314, 343, 372, 401 1 Bit I C - - W - DPT_Trigger 0/1 [Ix] Presence: Slave Input 0 = Nothing; 1 = Detection from slave device
315, 344, 373, 402 2 Byte I C - - W - DPT_TimePeriodSec 0 - 65535 [Ix] Presence: Waiting Time 0-65535 s.
316, 345, 374, 403 2 Byte I C - - W - DPT_TimePeriodSec 0 - 65535 [Ix] Presence: Listening Time 1-65535 s.
317, 346, 375, 404 1 Bit I C - - W - DPT_Switch 0/1 [Ix] Presence: Enable According to parameters
318, 347, 376, 405 1 Bit I C - - W - DPT_Switch 0/1 [Ix] Presence: Day/Night According to parameters
319, 348, 377, 406 1 Bit O C T R - - DPT_Occupancy 0/1 [Ix] Presence: Occupancy State 0 = Not Occupied; 1 = Occupied
320, 349, 378, 407 1 Bit
I C - - W - DPT_Trigger 0/1 [Ix] External Motion Detection
0 = Nothing; 1 = Motion detected by an external
sensor
321, 350, 379, 408 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] [C1] Detection State (Scaling) 0-100%
322, 351, 380, 409 1 Byte O C T R - - DPT_HVACMode 1=Comfort [Ix] [C1] Detection State (HVAC) Auto, Comfort, Standby, Economy, Building