MINiBOX 45 v2/MINiBOX 25 v2
Technical Support:
25
Lock Manual Control
[
enabled/
disabled
]: unless the above parameter has
been “Disabled”, the Lock Manual Control parameter provides an optional
procedure for locking the manual control in runtime. When this checkbox is
enabled, object “
Manual Control Lock
” turns visible, as well as two more
parameters:
➢
Value
[
0 = Lock; 1 = Unlock /
0 = Unlock; 1 = Lock
]: defines whether the
manual control lock/unlock should take place respectively upon the
reception (through the aforementioned object) of values “0” and “1”, or the
opposite.
➢
Initialization
[
Unlocked / Locked /
Last Value
]: sets how the manual control
should remain after the device start-up (after an ETS download or a bus
power failure). “Last Value” (default; on the very first start-up, this will be
Unlocked.
