Zennio MINiBOX 45v2, User Manual

Page: 32 / 37

MINiBOX 45 v2/MINiBOX 25 v2
http://www.zennio.com Technical Support: http://support.zennio.com
32
257, 262, 267, 286,
291, 296, 315, 320,
325, 344, 349, 354,
373, 378, 383
1 Byte O C T R - - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building Protection
[Ix] [Cx] Detection State (HVAC)
Auto, Comfort, Standby, Economy,
Building Protection
258, 263, 268, 287,
292, 297, 316, 321,
326, 345, 350, 355,
374, 379, 384
1 Bit O C T R - - DPT_Switch 0/1 [Ix] [Cx] Detection State (Binary) Binary Value
259, 264, 269, 288,
293, 298, 317, 322,
327, 346, 351, 356,
375, 380, 385
1 Bit I C - - W - DPT_Enable 0/1 [Ix] [Cx] Enable Channel According to parameters
260, 265, 270, 289,
294, 299, 318, 323,
328, 347, 352, 357,
376, 381, 386
1 Bit I C - - W - DPT_Switch 0/1 [Ix] [Cx] Force State 0 = No Detection; 1 = Detection
416, 427, 438, 449 1 Byte I C - - W - DPT_SceneControl 0-63; 128-191 [Ox] Scenes
0 – 63 (Execute 1 – 64); 128 – 191
(Save 1 – 64)
417, 428, 439, 450
1 Bit I C - - W - DPT_BinaryValue 0/1 [Ox] On/Off N.O. (0=Open Relay; 1=Close Relay)
1 Bit I C - - W - DPT_BinaryValue 0/1 [Ox] On/Off N.C. (0=Close Relay; 1= Open Relay)
418, 429, 440, 451 1 Bit O C T R - - DPT_BinaryValue 0/1 [Ox] On/Off (Status) 0=Output Off; 1=Output On
419, 430, 441, 452 1 Bit I C - - W - DPT_Enable 0/1 [Ox] Lock 0=Unlock; 1=Lock
420, 431, 442, 453 1 Bit I C - - W - DPT_Start 0/1 [Ox] Timer 0=Switch Off; 1=Switch On
421, 432, 443, 454 1 Bit I C - - W - DPT_Start 0/1 [Ox] Flashing 0=Stop; 1=Start
422, 433, 444, 455
1 Bit I C - - W - DPT_Alarm 0/1 [Ox] Alarm 0=Normal; 1=Alarm
1 Bit I C - - W - DPT_Alarm 0/1 [Ox] Alarm 0=Alarm; 1=Normal
423, 434, 445, 456 1 Bit I C - - W - DPT_Ack 0/1 [Ox] Unfreeze Alarm Alarm=0 + Unfreeze=1 => End Alarm
424, 435, 446, 457 1 Bit O C T R - - DPT_State 0/1 [Ox] Warning Time (Status) 0=Normal; 1=Warning
425, 436, 447, 458 4 Bytes I/O C T R W - DPT_LongDeltaTimeSec
-2147483648,
2147483647
[Ox] Operating Time (s) Time in Seconds
426, 437, 448, 459 2 Bytes I/O C T R W - DPT_TimePeriodHrs 0 - 65535 [Ox] Operating Time (h) Time in Hours
482 1 Byte I C - - W - DPT_SceneControl 0-63; 128-191 [Shutter] Scenes
0 - 63 (Execute 1 - 64); 128 - 191
(Save 1 - 64)
483, 511 1 Bit I C - - W - DPT_UpDown 0/1 [Cx] Move 0=Raise; 1=Lower
484, 512
1 Bit I C - - W - DPT_Step 0/1 [Cx] Stop/Step 0=Stop/StepUp; 1=Stop/StepDown
1 Bit I C - - W - DPT_Trigger 0/1 [Cx] Stop 0=Stop; 1=Stop
485, 513 1 Bit I C - - W - DPT_Enable 0/1 [Cx] Lock 0=Unlock; 1=Lock
486, 514 1 Byte I C - - W - DPT_Scaling 0% - 100% [Cx] Shutter Positioning 0%=Top; 100%=Bottom
487, 515 1 Byte O C T R - - DPT_Scaling 0% - 100% [Cx] Shutter Position (Status) 0%=Top; 100%=Bottom
488, 516 1 Byte I C - - W - DPT_Scaling 0% - 100% [Cx] Slats Positioning 0%=Open; 100%=Closed