MINiBOX 45 v2/MINiBOX 25 v2
Technical Support:
9
Thermostats
[
disabled
/enabled
]:
enables o disables the “Thermostats” tab
on the left menu. See section 2.5 for more details.
Master Light
[
disabled
/enabled
]:
enables o disables the “Master Light” tab on
the left menu. See section 2.6 for more details.
Scene Temporization
[
disabled
/enabled
]:
enables o disables the “Scene
Temporization
” tab on the left menu. See section 2.7 for more details.
Manual Control
[
disabled
/enabled
]:
enables o disables the “Manual Control”
tab on the left menu. See section 2.8 for more details.
Sending of Indication Objects (0 and 1) on Bus Voltage Recovery
[
disabled
/enabled
]: this parameter lets the integrator activate two new
communication objects (“
Reset 0
” and “
Reset 1
”), which will be sent to the KNX
bus with values “0” and “1” respectively whenever the device begins operation
(for example, after a bus power failure). It is possible to parameterise a certain
delay
[
0
…255
] to this sending.
Figure 3.
Sending of Indication objects on bus voltage recovery
Heartbeat (Periodical Alive Notification)
[
disabled
/enabled
]: this parameter
lets the integrator incorporate a one-bit object
to the project (“
[Heartbeat]
Object to Send ‘1’
”) that will be sent periodically with value “1” to notify that
the device is still working (
still alive
).
Figure 4
. Heartbeat (Periodical Alive Notification).
