206-3597-A
P A G E 4 5
Troubleshooting
Some quick and easy tips to fixing problems yourself
Problem
Possible Solution(s)
Not able to add a 3 digit
• Press the 1st digit of your channel number, wait until 2 dashes appear to the right of your
channel number.
number than add the other two digits.
Not able to lock video lock
• Exit out of Parental Control menu. Press the source button on your remote and change the source
feature in parental control.
to Video 1. Then you can reenter the parental control menu and lock the video lock. You must do
this same process to unlock the video lock.
Remote control doesn’t work.
• Make sure the batteries are fresh and installed properly.
Menu options can’t be
• Try unplugging your Entertainment Machine for a few minutes, then plug it back in.
changed or selected.
No picture or sound
• Check to see if the source equipment has been turned on. Make sure that the connections are
when any non-cable source
secure on the back of your Entertainment Machine and on the source equipment.
is selected.
Weak or no Stereo Sound
• Check to see if all the connections are secure.
when using a stereo VCR.
• Look in the Audio mode menu to see if all the settings are correct.
• You are using channel 3 or 4 to view your VCR. No stereo sound is present under that decision.
The PIP inset is black or
• You might want to adjust the PIP picture settings under the PIP menu.
lacks contrast.
• Check that all the wires are connected properly.
• Check to see if your input source for PIP is set correctly.
The PIP inset is “snow” when
• Look to see if the TV/VCR button on your VCR has the TV selected.
the source is Ant/Cable 1.
Time is incorrect.
• Make sure the time was set initially. Probably power was lost.
SURF PIP mode does not work.
• Make sure the TV is tuned to ANT 1 input.
• Make sure Parental Control Ratings are not locked.
Summary of Contents for IQC50H94W
Page 50: ...206 3597 A P A G E 4 8 Notes...
