Zenith IQC50H94W, Operating Manual

Page: 48 / 52

206-3597-A
P A G E 4 6
Glossary
A complete list of definitions for words found in this guide
75 OHM RF CABLE The round cable that comes from an off-air antenna or cable service
provider. Each end looks like a hex shaped nut with a wire sticking
through the middle, and it screws onto the threaded jack on the back
of your TV.
A/V CABLES Audio/Video cables. Three cables bunched together—Right audio (red),
Left audio (white), and Video (yellow). A/V cables are used for stereo
playback of videocassettes and for higher quality picture and sound
from other A/V devices.
A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box,
or television).
ADD This function lets you add new channels to the list that you’ll scroll
through when using your remote.
AMPLIFIER An external device that amplifies sound from a television, CD player,
VCR, DVD or other A/V device.
ANTENNA The physical receiver of television signals sent over the air.
CAPTIONS A form of subtitling that writes out the dialog for your program.
CONVERGENCE This option lets you correct for color separation in your picture.
DELETE This function lets you remove channels that you don’t watch from the
list you’ll scroll through.
ICON A small graphic item on your screen that represents a function or
menu item.
INPUT Refers to the jack that receives a signal into the TV, VCR or other
A/V device.
JACK A connection on the back of a TV, VCR, or any other A/V device. This
includes the RF jacks and the Audio/Video jacks
that are color-coded.
MODE The mode determines the type of device (TV, VCR, Cable, Aux) that the
remote is controlling.
MONO SOUND Mono (monaural) sound is one channel of sound. On more than one
speaker, all the speakers play the same audio.
OUTPUT Refers to the jack that sends a signal out of a VCR, DVD, or other
A/V device.
PIP This is the most common way to refer to the Picture-In-Picture
(PIP) option.