Zenith D56W25, Operating Manual & Warranty

Page: 6 / 56

206-3711
P A G E 6
Hookup Directory
For an overview of the jacks on your Entertainment Machine, go to . . . . . . . . . . . . . . . . . page 7
If you are using an antenna or have direct cable service, go to . . . . . . . . . . . . . . . . . . . page 8
If you are using a cable box, go to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
If you are using a VCR, go to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10
If you are using a VCR with a Cable Box, go to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11
If you are using a DVD Player, S-VHS VCR, or High Definition Set Top Box, go to . . . . . . . page 12
To hook up your Entertainment Machine to an external stereo, go to . . . . . . . . . . . . . . . page 13
For Monitor Out Hookups, go to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
IMPORTANT!! Use this page to decide what connections you need to make and to begin your
setup. First, find the lines below that best describes what you want to do, then go to those
page numbers.
Antenna/Cable
Cable Box
VCR
DVD Player/HDSTB
About your Jacks
Monitor Out
External Stereo
INPUT HOOKUP OPTIONS
GENERAL HOOKUP INFORMATION
VCR and Cable Box
NOTES:
1. Your component outputs may be labeled Y, B-Y, and R-Y. In this
case, connect the components B-Y output to the TV’s P B input
and the components R-Y output to the TV’s P R input.
2. Your component outputs may be labeled Y-C
B
C
R
. In this case,
connect the component C
B
output to the TV’s P
B
input and the
component C
R
output to the TV’s P
R
input.
3. It may be necessary to adjust TINT to obtain optimum picture
quality when using the Y-P
B
P
R
inputs. (See Video menu.)
4. To ensure no copyright infringement, the MONITOR OUT output
will be abnormal, if using the Y-P
B
P
R
jacks.
5. When using the Y-P
B
P
R
jacks, TV will automatically change to
SPLIT PIP mode. When you have Picture-on-Picture on and are
viewing a Y-P
B
P
R
input, only SPLIT mode is possible.
6. Inputs 3 and 4 (Y-VIDEO) can be used for standard video input.
TIPS ON REAR PANEL CONNECTIONS
• S-VIDEO connections are provided for high performance laserdisc
players, VCRs etc. that have this feature. Use these connections in
place of the standard video connection if your device has S-Video.
• If your device has only one audio output (mono sound), con-
nect it to the left audio jack on the television.
• Refer to the operating guide of your other electronic equipment
for additional information on connecting your hook-up cables.
• A single VCR can be used for VCR #1 and VCR #2, but note that
a VCR cannot record its own video or line output. Refer to your
VCR operating guide for more information on line input-output
connections.
• You may use VIDEO or S-VIDEO inputs to connect to Input 1,
Input 2, or Input 5 but only one of these may be used at a time.
• Connect only 1 component (VCR, DVD player, camcorder, etc.) to
each input set of jacks.
• COMPONENT: Y-P
B
P
R
connections are provided for high perfor-
mance components, such as DVD players. Use these connections in
place of the standard video connection if your device has this fea-
ture. When using the Y-P
B
P
R
input jacks, Input 3 and 4 will be
viewed as a split PIP Sub-Picture.
• Your component outputs may be labeled Y, B-Y, and R-Y. In this
case, connect the components B-Y output to the TV’s P
B
input and
the components R-Y output to the TV’s P
R
input.
• Your component outputs may be labeled Y-C
B
C
R
. In this case,
connect the components C
B
output to the TV’s P
B
input and the
components C
R
output to the TV’s P
R
input.
• You may use standard video signal for INPUTS 1, 2, 3, 4, and 5.
• For component video, you may use INPUTS 3 and 4 only.
• It may be necessary to adjust TINT to obtain optimum picture
quality when using the Y-P
B
P
R
inputs. (See Video menu.)
• To ensure against copyright infringement, the MONITOR OUT
output will be abnormal, when using the Y-P
B
P
R
jacks.