7
806310NZ v1.06 08.19 CW ChillMaster & EconoMaster
In order to help preserve our environment we ask that you dispose of this product correctly. Please contact your local
city council for collection centre details.
Prior to any fault finding, please ensure all water connections to the unit are sound and that the incoming water supply
is turned on. Ensure that all electrical connections to the unit are secure and that the unit has had adequate time to cool
down.
Call a licenced electrician, plumber, or Zenith free call in New Zealand on 0800 558 055, for assistance, service, spare
parts, or enquiries.
Fault
Possible Cause
Solution
No water supplied
Mains water not connected or turned on Connect or turn on water supply.
Water pressure regulator failed
Contact local Zenith Service Provider.
Unit frozen up
Contact local Zenith Service Provider.
Internal water leak
Contact local Zenith Service Provider.
Leak detector activated
Identify and repair any leaks. Replace
leak detector pad. Contact local Zenith
Service Provider if required.
Water not chilled
No power
Restore power to the unit.
Thermostat faulty or out of calibration.
Contact local Zenith Service Provider.
Insufficient cooling air flow through the
refrigeration system
Check and clean air inlet screen.
Refrigeration failure
Contact local Zenith Service Provider.
Rated chilled water capacity has been
exceeded
Allow unit sufficient time to recover.
Poor flow at outlet
Blocked filter
Replace filter.
End of life disposal
Troubleshooting