Zelmer zvc012zq, User Manual

Page: 38 / 40

44
ZVC012ZQ-001_v01
Technical parameters
The vacuum cleaner type and technical parameters are
indicated on the rating label.
The appliance is built according to rules applicable to
insulation class II, and does not require grounding
.
ZELMER vacuum cleaners meet the requirements of the
existing norms.
The appliance is in conformity with the requirements of the
directives:
–
Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
Noise level: 69 dB/A.
The appliance was marked by the CE sign on the rating label.
For CE marking declaration of conformity please visit the
manufacturer’s website at www.zelmer.com.
Electrostatics
Vacuuming some surface types in low humidity conditions
may cause the appliance to become charged with static. It is
a natural phenomenon, it does not damage the appliance
and it is not its defect.
In order to minimize this effect, it is recommended to:
●
discharge the appliance by frequent touching metal
objects in the room with the tube,
●
increase the humidity in the room,
●
use general anti-static agents.
Appliance elements
A
1 ON/OFF button
2 Handle
3 Handle release button
4 Vacuum cleaner housing
5 Hand vacuum cleaner
6 Electrobrush release button
7 Dust container release button (“ON” indicator)
8 Electrobrush
9 Charging station with clip for attaching vacuum cleaner
10 Charging station base
11 Hand vacuum cleaner housing
12 Hand vacuum cleaner release button
13 Hand vacuum cleaner ON/OFF button
14 3 in 1 brush
A Brush – attachment for small nozzle
B Small nozzle
C Crevice nozzle
15 “CYKLON” dust container (installed in the vacuum
cleaner)
16 EPA filter (installed in the vacuum cleaner)
17 Plug and power cord
Assembling – preparing the vacuum
cleaner for operation
1 Open the vacuum cleaner handle.
2
Connect the vacuum cleaner housing with the
electrobrush.
3 Connect the charging station with the base.
4
Place the housing of the vacuum cleaner with the
electrobrush on the charging station. In order to do so, put
the clip of the vacuum cleaner housing onto the charging
station fastening hook.
5 Place the hand vacuum cleaner on the vacuum cleaner
housing. In order to do so, insert the inlet of the hand vacuum
cleaner into the air inlet, and press the housing of the hand
vacuum cleaner to the housing of the vacuum cleaner.
Characteristic clicking sound indicates the correct installation
of the hand vacuum cleaner.
6
In order to start vacuuming, remove the vacuum cleaner
from the charging station and press the “ON/OFF” button.
VACUUMING WITH THE HAND VACUUM CLEANER
1
Remove the hand vacuum cleaner from the housing by
pressing the release button.
2 The hand cleaner can be used separately or with the
accessories included.
3
Switch on the hand vacuum cleaner by pressing the “ON/
OFF” button. The “ON” indicator will light up.
●
When finished working with the hand vacuum cleaner
switch it off by pressing the “ON/OFF” button (13) .
In order to place the hand vacuum cleaner on the
housing, insert the inlet of the hand vacuum cleaner into
the air inlet, and press the housing of the hand vacuum
cleaner to the housing of the vacuum cleaner.
Vacuum cleaner accessories
ELECTROBRUSH 8
Electrobrush is used to clean short hair carpets, carpet
floorings, floors or tiles. With the rotary brush it has the ability
to remove old and stubborn dirt, and difficult-to-remove dirt
such as threads, rags, paper, etc.
It is practically useful in households with pets, where removing
the animal hair from the carpets and floorings is very onerous.
Do not use the electrobrush on long hair
carpets. When used on this type of carpet for
a longer time, protection will activate and the
electrobrush will switch off automatically. This
is normal feature and protects the electrobrush
from damage. To switch on the device again,
wait for a few minutes.
If the electrobrush comes in contact e.g. with
a hand, protection feature will automatically
switch off the brush in order to avoid injury.
B
C