45
VC1260-001_v01
Operating the unit
The unit has two steam functions that you can choose from.
The steam mop generates hot steam for easy removal of dirt
from hard floors, but may also be used as an electrobrush for
sweeping hard floors or carpets.
ASSEMBLING THE TUBE WITH THE HOLDER
Remove all the parts from the package.
●
1
Put the end of the tube into the steam mop base and
push the tube base together until it locks into place.
2
Wind the excess cord around the cord wraps.
SWEEP FUNCTION
1
Connect the unit to an appropriate outlet.
2
Press the
button to turn on the electrobrush.
The electrobrush may be used on hard level
floors both with or without the cleaning pad.
On short pile carpets, the electrobrush should
be used without the cleaning pad.
3
After use turn off the electrobrush by pressing the
button.
4
To empty the waste container, lift it by the holder located
in the upper lid.
5
Push the release button located on the back of the
container to remove the waste.
6
Close the emptied waste container and refit it until it
clicks into place.
Before using the sweep function make sure
that the waste container is fitted in the unit.
Do not lift the electrobrush from the floor when
in operation.
STEAM FUNCTION
To use the steam function, follow the instructions below.
1
Match and attach the micro-fibre cloth to the cleaning
pad.
Make sure that the velcros on the cleaning pad
and on the cloth fit well.
2
To fit the cleaning pad onto the unit, gently lower the
cleaning head onto the cleaning pad, so that head wheels
click into the notch in the cleaning pad. To detach the
cleaning pad, hold the pad release tab with your foot and lift
the cleaning head.
Never use the mop with the steam function
without the micro-fibre cloth attached.
3
Remove the water tank by releasing the hook of the
water tank and pulling the tank towards you.
B
D
F
Suggestion
Information on the product and suggestions
for its use
The shaver is for household use only.
●
Do not use the unit inconsistently with its intended
●
use.
Do not use the steam mop for purposes other than
●
those described in this user manual.
Use the mop only with the provided accessories.
●
Technical data
The type and parameters of the steam mop are stated on its
rating plate.
The steam mop is a class I device, equipped with the
cord with a protective conductor and a plug with a ground
contact.
The appliance meets the requirements of the applicable
standards.
The appliance is in conformity with the requirements of the
directives:
Low voltage appliance (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
Noise level: max. 65 dB/A
The appliance was marked by a CE sign on the rating label.
Features
A
1
Cord wrap
1
Water tank hook
1
Water tank
1
Water softening filter
1
Waste container handle
1
Waste containers
1
Electrobrush
1
Pad release tab
1
Cord
1
Tube lock
1
Tube with handle
1
Trigger
1
Cleaning head
1
Microfiber cloths for persistent stains (2 cloths)
1
Regular cleaning cloths (2 cloths)
1
Cleaning pad
17
Electrobrush on/off button
18
Indicator lights (HEAT – heating, STEAM – steam,
SWEEP – electrobrush)
19
HEAT on/off switch
Summary of Contents for Puris VC1260
