Zelmer IR2200, User Manual

Page: 83 / 88

83
IR2200-001_v02
7 Water Tank Cover
8 Spray Nozzle
9 Steam nozzle
10 Bend Protector
11 Power Cord
12 Auto-Off Light (green)
13 Heater Light (red)
14 Water Tank
15 Soleplate
Before first use
1 Unwind and straighten the Power Cord .
2 Fill the tank with water. See the “FILLING THE IRON
WATER” section.
3 Plug in the unit.
First use
1 Proceed as described in the “Before first use” section.
2 Turn the Temperature Dial clockwise to „●●●”.
3 The Heater Light will come on.
The light will go off once the required
temperature is reached.
4
Set the Steam Control to position.
5
Place the iron in horizontal position or press the steam
burst button. Steam will come out of the holes in the soleplate.
●
The iron is ready for use.
6 Begin first time ironing with an old towel.
The iron will stop steaming once the water tank
is empty.
Ironing
Always follow the ironing instructions on the
garment’s care label.
FILLING THE IRON WITH WATER
●
Unplug the unit.
1
Set the Steam Control to position and lift the Water
Tank Cover .
2 Fill the tank with water using the supplied cup.
For best ironing results, it is recommended to
use fresh demineralised or distilled water.
Do not use chemically descaled water or any
other liquids.
Never exceed the ‘Max’ level marked on the
side of the water tank.
3 Close the Water Tank Cover .
B
DRY IRONING
1 Proceed as described in the “Before First Use” section.
2 Set the Steam Control to position.
3
Turn the Temperature Dial to „●”, „●●” or „●●●”.
4
The Heater Light will come on.
The light will go off once the required
temperature is reached.
●
The iron is ready for use.
STEAM IRONING
1
Proceed as described in the “Before first use” section.
2
Turn the Temperature Dial to „●●” or „●●●”.
For optimum steam quality, do not set the
Temperature Dial to „●” position for steam
ironing.
3
The Heater Light will come on.
The light will go off once the required
temperature is reached.
●
The iron is ready for use.
4 Use the Steam Control to set the required amount of
steam.
SPRAYING
This function can be used any time without
affecting any other settings.
1 Fill the water tank. See the “FILLING THE IRON WITH
WATER” section.
2
Aim the nozzle at the garment.
3
Press the Spray Button .
It may be necessary to press the spray button
a few times to start spraying.
FRONTAL JET – FRONTAL STEAM SHOOTING
The frontal function enables a steam burst by the frontal
steam nozzle. The steam burst initially loosens fibres during
ironing. It also eliminates creases and refreshes the material.
The frontal jet function is safe for delicate materials as the
hot soleplate of the iron is not aimed at the fabric.
The steam generated by the iron has very
high temperature. Never use the appliance for
ironing clothes or fabrics while they are being
worn by people or pets. Never aim the steam at
people or pets.
1 Proceed as described in the “Before First Use” section.
2 Turn the Temperature Dial to „●●●”.
3 The Heater Light will come on.
The light will go off once the required
temperature is reached.