Zeiss S100/OPMI pico, Instructions For Use Manual

Page: 200 / 278

Operation S100 / OPMI pico
Version 7.0
Page 200 G-30-1781-en
3 Display the ZEISS logo
Here you can choose whether the ZEISS logo is to be displayed in the live
image and in the recording.
4 Video standard
You can switch from 50 Hz (PAL) and 60 Hz (NTSC) here.
After you have started the switchover, the settings will be applied and the
camera will restart. This process can take up to 30 seconds. In the mean-
time the ZEISS logo will be displayed filling the entire screen.
5 DVI / HDMI output
Here you can toggle between the video formats "PC mode" and "Video
mode" when a high-resolution display unit (monitor, projector, etc.) is
connected.
You can find the correct setting for your connected monitor or TV in the
Instructions for Use belonging to your output device.
If you do not find any information for this setting, we recommend PC
mode (default) for display units with a DVI connection. For display units
with an HDMI connection we recommend the video mode setting. PC
mode offers greater image quality than video mode.