Zeiss S100/OPMI pico, Instructions For Use Manual

Page: 228 / 278

Care and Maintenance S100 / OPMI pico
Version 7.0
Page 228 G-30-1781-en
Changing the fuse - halogen illumination system
The fuses are integrated in the power inlet socket for the power cable. To
change a fuse, proceed as follows:
• Turn off the unit at the power switch.
• Unplug the power cable from the line power socket.
• Unplug the power cable from the power inlet socket.
• Insert a suitable object under two flaps (1) and pull out fuse holder (2).
• Remove the defective fuse.
• Insert the new fuse and push the fuse holder back into its compartment.
Note the voltage rating of the line fuse. This rating can be found on the type
label.
• Connect the device to the power supply.
• Turn on the device at its power switch.
Fig. 103: Changing the fuses
CAUTION Use suitable device fuse
• Only use the fuse indicated for the device (see order data).
Fuse rating
For 100 V...125 V~ T 6,3 A/H 250 V
For 220 V...240 V~ T 3,15 A/H 250 V
1
2
1