Zeiss S100/OPMI pico, Instructions For Use Manual

Page: 100 / 278

Preparations for use S100 / OPMI pico
Version 7.0
Page 100 G-30-1781-en
Connect the stereo co-observer
Mounting the beam splitter
• Unscrew securing screw (3) by a few turns.
• Remove the inclined tube (1).
• Position the beam splitter (2) on the surgical microscope.
• Firmly tighten securing screw (5).
• Position the inclined tube (1) on the beam splitter (2) and tightenthe se-
curing screw (3) firmly.
Mounting the co-observation module
• Loosen knurled ring (4).
• Remove the dust cover (6) from the holding fixture of the beam splitter (2)
and store it in a safe place.
• Slide the stereo co-observation module (7) into the holding fixture. Make
sure that the locating block is fed into the counterpart of knurled ring (4).
• Firmly tighten knurled ring (4).
• Mount a tube (8) on the stereo co-observation module (7).
After having mounted the accessories, you must perform a weight compen-
sation procedure (see Page 103).
Fig. 51: Stereo co-observation
module
5
3
7
6
1
4
2
8