CL 6000 LED- | CL 9000 LED-Bedienungsanleitung
Stand Oktober 2015
30
4.3.3 Menu item „DimSteps“
In this sub-menu the fi neness of the rotary encoder (2) can be set and adjusted.
Rotate
Press briefly
Rotate
*** Menu ***
DimSteps >
Rotate
< DimSteps:
< Coarse (4)
< DimSteps:
< Fine (1)
< DimSteps:
< Middle (2)
Rotate the incremental encoder (2) in the menu to
access the menu item „DimSteps“. Briefl y press the
incremental encoder (2) to access a sub-menu where
the fi neness of intensity steps can be adjusted. Ro-
tate the encoder (2) to select between the settings
‘coarse‘, ‘medium‘‘ and ‚fi ne’.
The setting ‘fi ne’ controls the intensity in 100 steps
of 1 unit each. In the setting ‘coarse’, the intensity is
controlled in 25 steps of 4 units each, and in the set-
ting ‘medium’, the intensity is controlled in 50 steps
of 2 units each.
Confi rm the selection by briefl y pressing the encoder
again.
4.3.4 Menu item „Reset all“
In this sub-menu all adjustable parameters can be reset to the factory settings
Press briefly
Rotate
*** Menu ***
Reset all >
Rotate
Reset all?
< YES
Reset all?
< NO
Rotate the incremental encoder (2) in the menu to ac-
cess the menu item ‘Reset all’. Briefl y press the rotary
encoder (2) to access a sub-menu where the factory
settings of the device can be re-instated. The display
shows the question ‘Reset all?’. Rotate the incremen-
tal encoder to decide between ‘NO’ and ‘YES’ and
briefl y press the incremental encoder (2) to confi rm
your selection.
Choosing option ‘NO’ will retain the device settings,
while option ‘YES’ will reset the device to its factory
settings.